Filtration Media
 

PRODUCTS


Filter Anthracite, Anthracite Filter Media

We are one of the known Exporters, Manufacturers and Suppliers of Anthracite Filter Media, Filter Anthracite. in New Delhi, India. Anthracite produces consistent improvements in turbidity removal because, in part, to more efficient solids loading. Low uniformity coefficient media also produces smaller changes in effluent turbidity during periods of peak influent turbidity.

Anthracite filter media which is used in open and closed filter for filtration of brine apart from corrosive liquid is. Its irregular shape is suitable for single and multilayer filtration. Low density in wet condition enable low backwash rate.

Clarified brine is pumped into anthracite filter for removal of suspended solids. Normally suspended solid load after clarifier is in the range of 10 – 15 ppm. It has been our experience that if clarifier is designed for maximum solids 20 ppm at the outlet then low leakage or suspended solids and longer service run of anthracite filter can be ensured.

Our outputs of the Anthracite Filter come utilized in a variety of filter media in various open and closed filters for water and wastewater treatments from across the spectrum. Our outputs come hydraulically categorized and float above other heavier media such as sand, manganese, greensand etc. Our output has to its name a wonderful regular shape that comes suitable for various single and multi-layer filtration operations and options.

Chemical Properties
Ash Content 20.0% max
Carbon Content 80.0% min

Physical Properties
Appearance Black granules
Specific Gravity (avg) 1.4 – 1.5
Packing Density (avg) kg/m3 1000-1100

       
       
-: Product Range :-